Diamond
Scale Products
330-683-1801
Monday-Friday 9:00 AM - 5:00 PM
Home Products Ordering Info About Us Links Email Us
Diamond Scale Products Price List
Effective August 16, 2023
HO Scale Turntable Kits | ||
Part # | Description | Price |
GT-056 | 56 foot Gallows Truss | 157.00 |
SS-065 | 65 foot Small Girder | 170.00 |
SS-075 | 75 foot Small Girder | 180.00 |
ST-090 | 90 foot Steel Truss | 248.00 |
ST-115 | 115 foot Steel Truss | 259.00 |
ST-135 | 135 foot Steel Truss | 271.00 |
TS-090 | 90 foot Large Girder | 197.00 |
TS-105 | 105 foot Large Girder | 205.00 |
TS-120 | 120 foot Large Girder | 212.00 |
TS-134 | 134 foot Large Girder | 220.00 |
TT-051 | 51 foot Timber Truss | 150.00 |
TT-060 | 60 foot Timber Truss | 155.00 |
N-Scale Turntable Kits | ||
Part # | Description | Price |
NT-100 | 100 foot Large Girder | 151.00 |
NT-135 | 135 foot Large Girder | 157.00 |
Sn3-Scale Turntable Kits | ||
Part # | Description | Price |
SN-065 | 65 foot Small Girder | 158.00 |
O-Scale Turntable Kits | ||
Part # | Description | Price |
OT-080 | 80 foot Large Girder | 512.00 |
OT-105 | 105 foot Large Girder | 529.00 |
OT-130 | 130 foot Large Girder | 544.00 |
Motor Drive | ||
Part # | Description | Price |
MK-111 | Turntable Motor Kit | 78.00 |
MK-122 | 250 Ohm 3 Watt Potentiometer | 14.00 |
MK-125 | 3 A. Normal Open Push-button Switch | 6.00 |
MK-130 | Motor (Replacement) 10 Volts DC | 13.00 |
Indexing | ||
Part # | Description | Price |
LK-114 | for 115 to 135 foot and all O-scale | 152.00 |
LK-110 | for 51 to 105 foot, Sn3 and N-scale | 151.00 |
LK-1151 | Additional Wood Block Sensors, each | 12.00 |
PCB-1 | Printed Circuit Board, Indexing | 75.00 |
HO Scale Facility Kits | ||
Part # | Description | Price |
AK-101 | Turntable Arch Kit, Round Top | 28.00 |
AK-102 | Turntable Arch Kit, Angle Top | 28.00 |
AP-414 | Ash Pit Kit | 29.00 |
DSF-600 | Diesel Service Facility, Sand Towers | 89.00 |
DSF-601 | Diesel Service Facility, Fuel & Water | 71.00 |
DSF-602 | Diesel Service Facility, Combined | 120.00 |
IP-420 | Inspection / Repair Pit Kit | 25.00 |
LP-404 | Yard Lights, Package of 4 | 6.00 |
OC-413 | Oil Column Kit | 14.00 |
ST-416 | Sand Tower Kit | 37.00 |
WC-412 | Water Column Kit | 19.00 |
WP-407 | Wash Platform Kit | 23.00 |
UP-410 | Utility Pole Kit, 2 Units per kit | 22.00 |
N Scale Facility Kits | ||
Part # | Description | Price |
AK-103 | Turntable Arch Kit, Round Top | 25.00 |
OC-419 | Oil Column Kit | 14.00 |
WC-411 | Water Column Kit | 14.00 |
O Scale Kits | ||
Part # | Description | Price |
AK-104 | Turntable Arch Kit, Angle Top | 40.00 |
Miscellaneous | ||
Part # | Description | Price |
CB-27 | Turntable Control Cab, N scale | 7.00 |
CB-28 | Turntable Control Cab, HO scale | 9.00 |
CB-30 | Turntable Control Cab, O scale | 22.00 |
DT-05 | Large Dolly Trucks, HO scale, pair | 35.00 |
DT-06 | Small Dolly Trucks, HO scale, pair | 25.00 |
DT-09 | Dolly Trucks, O-scale, pair | 58.00 |
Miscellaneous Hardware | ||
Part # | Description | Price |
B-104 | 1/4 ID Self-aligning Pillow Block Bearing | 5.00 |
B-187 | 3/16 inch ID Oil-filled Bronze Bushing | 2.00 |
B-250 | 1/4 inch ID Oil-filled Bronze Bushing | 2.00 |
B-312 | 5/16 inch ID Oil-filled Bronze Bushing | 2.00 |
B-437 | 7/16 inch ID Oil-filled Bronze Bushing | 2.00 |
CS-312 | 5/16 inch Center Shaft | 5.00 |
DP-12 | 12 position Rotary Switch Dial Plate | 5.00 |
DP-74 | Index Control Panel | 20.00 |
HC-10 | Manual Hand-crank Kit | 70.00 |
HW-3 | Handwheel | 42.00 |
RS-112 | 12 position single pole Rotary Switch | TBA |
RS-212 | 12 position 2 pole Rotary Switch | 53.00 |
RS-223 | 23 position 2 pole Rotary Switch | 90.00 |
RK-119 | Rotary Switch Knob | 3.00 |
S-314 | 1/4 inch x 3 foot CR Steel Shaft | 10.00 |
SC-187 | 3/16 inch ID Shaft Collar | 3.00 |
SC-250 | 1/4 inch ID Shaft Collar | 3.00 |
SC-312 | 5/16 inch ID Shaft Collar | 3.00 |
SC-437 | 7/16 inch ID Shaft Collar | TBA |
US-1-21 | Single Universal Fits 1/8" Shaft & 3/16" Shaft | 15.00 |
US-1-24 | Single Universal Fits 3/16" Shaft & 1/4" Shaft | 16.00 |
US-1-25 | Single Universal Fits 1/4" Shaft & 1/4" Shaft | 16.00 |
US-2 | Double Universal (specify shaft sizes) | TBA |
WG-7 | Worm & Gear for HO, S and N-scale | 20.00 |
WG-9 | Worm & Gear for O-scale | 140.00 |
WS-87 | 3/16 x 6 inch Worm Shaft | 5.00 |
WE
ACCEPT MASTERCARD, VISA, DISCOVER
Copyright
© Diamond Scale, all rights reserved
Last updated 08/16/2023